Pillar Technologies


	Q1. What other problems can arise during the corona treating process?/How can they be addressed? Q2. What must converters do to keep their corona treating equipment at optimum and consistent operating levels? Q3. What causes unwanted backside treatment and what problems can cause it? How can it be prevented? Q4. How is this tension controlled/measured? Q5. How important is proper web (film) tension in the corona treating process? Q6. What should converters do to determine if dyne levels are acceptable before printing? Q7. How can converters determine that they are at the proper level? Q8. What can be done to avoid over-/undertreating substrate surfaces? Q9. Is over/undertreating film a common problem? Q10. What printing problems result? Q11. How do we Determine the Right Watt Density for my Application? Q12. How Does It Work? Q13. What is Corona Treatment?	Trouble-Shooting Guides Trouble Shooting - P6000, 5.0-30kW Trouble Shooting - P6000, 0.5-3.5kW Trouble Shooting - P1000 Trouble Shooting - 500 Series Dyne Level Covered Roll vs. Uncovered Roll Clean Electrodes Watt Density Testing an IGBT Unwanted Backside Surface Treaters Frequently Asked Questions

475 Industrial Drive
Hartland, WI 53029
USA
phone: 1.262.912.7200
toll free: 1.888.PILLAR6
fax: 1.262.912.7272

Trouble-Shooting Guides